Pressure management valve fig. XLC 310/410-T PN 16/25

The XLC 310/410-T valve reduces and stabilises the downstream pressure following a set-point curve based on flow variations, regardless of fluctuations or changes in upstream pressure, by means of signals supplied by a CSA controller or a PLC with batteries or auxiliary power.

Features

• GJS 450-10 ductile iron body and cover.

• GJS 450-10 ductile iron and stainless steel internal components.

• Stainless steel position indicator.

• Stainless steel pilot circuit.

• Stainless steel adjusting device, needle valves and flow stabilisers.

• Stainless steel seat.

• RAL 5005 blue epoxy coating applied by fluidised bed technology.

Applications

• Downstream pressure control based on demand.

• Pressure management to minimise leakage flow, with pressure modulation downstream of the valve or at the critical point through communication.

• Reduction of operating costs and leakage management in the water distribution system thanks to intelligent system management.

• Operated by a CSA controller with an intuitive web interface, integrated with any existing remote control or SCADA system.

Reference standards and flanges

• Designed and tested to EN 1074.

• Flanges from DN 50 to DN 400 mm, larger sizes on request.

• Flanges to EN 1092/2, others on request.

Working conditions

• Pressures: 10-16-25 bar.

• Minimum pilot pressure: 0.7 bar.

• Clean water up to 70ºC, version for higher temperatures on request.